Wirewolf / Starlink installation in Toronto

Toronto · Etobicoke · North York · Scarborough · Mississauga · Vaughan · Markham · Brampton · Richmond Hill

Starlink installation in Toronto & the GTA

$449 flat for a standard roof or gable mount, zero travel fee anywhere in Zone A — Toronto, Etobicoke, North York, Scarborough, Mississauga, Vaughan, Markham, Brampton, Richmond Hill, Oakville and Milton. Installed by a certified AV field engineer who'll tell you straight when a condo balcony's exposure won't work, instead of mounting a dish that never gets a signal.

// Most quotes answered within the hour, seven days a week

$449flat standard install
Zone A$0 travel across the GTA core
Condo-safeinsurance certificate on request
$0 upfrontpay after the speed test
Condos & high-rises

The honest answer about a balcony Starlink install

Most condo buildings already have bulk internet or building-wide fibre, and for a lot of units that's genuinely fine — we're not going to talk you into a $449 install you don't need. The calls we get are usually one of two things: a unit where the building's internet has been unreliable for months and management won't fix it, or someone who wants Starlink specifically as a backup line for a home office, so a building outage doesn't cost them a workday.

The thing that actually decides whether it's possible is the sky view, not the floor. Starlink needs a genuine, unobstructed slice of open sky — for most Toronto exposures that means a real northern view with nothing in the way: no neighbouring tower, no roof overhang, no balcony glass or privacy screen cutting the angle down to nothing. We check this first, from photos or a quick visit, before anyone books an install date. A high floor with an open northern exposure is usually straightforward. A low floor boxed in by taller buildings on three sides usually isn't, and we'll say so on the phone.

Mounting to a balcony railing means touching a shared exterior surface, so condo board approval comes first — we'll give your property manager what they need to sign off, and we carry commercial general liability insurance with a certificate we can send ahead of the visit on request. And if your specific unit's exposure genuinely will not work, we'll tell you that outright instead of mounting a dish that never holds a signal. We'd rather lose the job than leave you with an expensive paperweight bolted to your railing.

Townhouses & detached

Roof and gable mounts on tight city lots

Etobicoke, North York and Scarborough are full of exactly the lot sizes that make a satellite install more of a puzzle than a suburban acreage ever is: narrow setbacks, mature trees the city won't let you touch, a neighbour's addition sitting closer to your roofline than the last provider's map accounted for. A standard roof or gable mount is still the right answer for most of these — $449 flat — but it only works if the survey confirms the sky view is actually clear from that spot, not just clear enough on paper.

Townhouses add their own wrinkle: shared walls mean the cable entry point has to be planned around what's actually your unit and what isn't, and a roofline that a neighbour two doors down already has an antenna bolted to isn't necessarily the same angle you'll get. When tree canopy or a blocked roofline rules out the standard mount, a pole or non-penetrating mount — $549 — gets the dish clear without cutting into a roof you'd rather leave alone.

Either way, the cable gets dressed along brick, siding or stucco and sealed properly at the entry point — not stapled along a fence line or left as a silicone blob through the wall.

Why call us if cable already works

Three real reasons a Toronto homeowner still wants Starlink

A backup line for a home office. Cable and fibre in the city are generally reliable, right up until the afternoon they aren't — a cut line, a neighbourhood outage, a building wiring fault nobody's in a hurry to fix. For anyone whose income depends on being online, a second connection on a completely different network is cheap insurance against losing a billable day.

Rural properties just outside the city. The GTA core has good service; the edge of it doesn't always. Properties out past Brampton and Vaughan, and the rural stretch around Milton, show up on every provider's coverage map as serviced — and then the actual line at the driveway tells a different story. That's the gap Starlink fills.

New builds waiting on a fibre hookup. New subdivisions across the GTA get sold with fibre as a feature and then wait months for the provider to actually run it — we've installed Starlink as the working connection for more than one family moving into a finished house with an unfinished internet promise.

Etobicoke base, zero travel

Zone A means no travel fee anywhere in the GTA core

We're based in Etobicoke, and Toronto, Mississauga, Vaughan, Markham, Brampton, Richmond Hill, Oakville and Milton all sit inside our Zone A — 0 to 50 km, travel free, no add-on line item to negotiate. That's most of what we drive to in a given week, which means the schedule isn't fighting a two-hour round trip before it even gets to your install.

In practice that means most Zone A bookings go within the same week, and weekday slots in the city core are often same-day — text a photo in the morning and there's a real chance we're at your address that afternoon. Weekend slots book first, so if you know you want a Saturday, ask early.

Recent job — details anonymized

One rural property, two dishes, one afternoon

Not every call from a GTA number is a condo balcony. A recent job on a rural property outside the city — the kind of address Zone A still reaches without a travel fee — needed Starlink on two separate houses on the same lot. Both got standard roof mounts once the sky-view survey cleared them; no pole needed.

Wiring the second house properly meant a 150 ft custom cable run, clipped along the facade and routed inside rather than drilled through wherever was convenient, plus three mesh Wi-Fi nodes split across both buildings so coverage reached every room instead of just the one closest to the dish. Two dishes, one clean cable run, a network that covers the whole property — the same standard we hold a one-bedroom condo install to.

Toronto rate card

Flat Starlink installation prices, published before we book

Competitors quote “from $550” and will not tell you the real number until a tech is standing in your driveway. Here is ours, in advance.

Starlink installation Flat rate

Standard roof or gable mount$449
Pole or non-penetrating mount$549
Mesh Wi-Fi node (install & configuration)from $199
Ethernet run to a garage, laneway suite or second unit (per drop)$120
Custom cable runs (per foot)$2/ft · materials at cost
Old dish removal — dish only$99 · free w. Starlink
Full removal + holes patched$179
Starlink kit sourced and delivered to siteat cost + $100
Starlink account setup & activation$50
Travel across Toronto & the GTA core (Zone A, 0–50 km)FREE

// Prices in CAD before HST. No kit yet? We can source a genuine Starlink kit and the official mounts through authorized Canadian retail and deliver them on install day — hardware billed at cost with the receipt in your hand, no markup, plus $100 for the sourcing and delivery run and $50 for Starlink account setup. Most installers will not book you until the dish is already in your hallway; we would rather go and get it. Order the kit yourself and neither fee applies. The subscription itself activates on your own Starlink account. Already have a kit? Even easier. Mesh Wi-Fi hardware and custom cable materials are billed at cost with the receipt shown.

// Two installs in one visit — a second unit, a rental, a neighbour who needs one too? $100 off when we book them on the same trip, ask when you text.

// Toronto sits in our Zone A along with Etobicoke, Mississauga, Vaughan, Markham, Brampton, Richmond Hill, Oakville and Milton — travel is free from 0 to 50 km. See the full travel zone breakdown if you're calling from further out.

Where we go

Toronto neighbourhoods and GTA cities we install in

Within Toronto: Etobicoke, North York, Scarborough, York, East York and the old city core — condos, townhouses and detached homes alike, wherever the sky view actually allows it.

Around Toronto: Mississauga, Vaughan, Markham, Brampton, Richmond Hill, Oakville and Milton — all inside our free Zone A. Further out, the rate card stays the same and only the travel fee changes; see the full travel zone table for anything past 50 km.

What you actually get

A finished install, tested before we leave the building

  • Sky-view survey before anything gets drilled or mounted to a railing
  • Condo board paperwork handled — certificate of insurance sent on request
  • Weatherproof cable entry — sealed properly on brick, siding or stucco, no silicone blob
  • Mesh Wi-Fi that actually reaches the far bedroom, not just the unit closest to the dish
  • Ethernet drops to a garage, laneway suite or second unit where Wi-Fi won't reach
  • Old satellite dish and antenna taken away, holes sealed
  • Lifetime workmanship warranty on every install
  • Speed test results in your hand before we leave
Flat install
$449

standard roof or gable mount, zero travel fee in Zone A

TEXT YOUR ROOF PHOTO
Toronto FAQ

Straight answers about Starlink in Toronto and the GTA

Will Starlink work on a condo or high-rise balcony?
It depends entirely on what the balcony can actually see. Starlink needs a clear view of open sky — for most Toronto exposures that means a genuine northern view with nothing blocking it: no neighbouring tower, no overhang, no balcony glass in the way. We check the sky view first, from photos or a quick visit, before anyone books an install date. If it works, we mount to the railing with your condo board's approval and can send a certificate of insurance to your property manager on request. If the exposure genuinely won't work, we'll tell you honestly instead of installing a dish that never holds a signal.
I already have cable or fibre — why would I want Starlink too?
Plenty of Toronto homeowners keep both. The most common reason is a backup line for a home office — if the cable goes down mid-workday, Starlink keeps you online instead of losing the afternoon. The others are rural properties just outside the city, where the coverage map shows service the actual address never gets, and new builds where fibre is sold but the hookup is still months out. If you're in a serviced condo or house with internet that already works and no need for a backup, we'll say so — Starlink isn't an upgrade for everyone.
How fast can you come?
Etobicoke is our base, so Toronto, Mississauga, Vaughan, Markham, Brampton, Richmond Hill, Oakville and Milton all sit in our free Zone A — no drive time working against the schedule. Most bookings go within the week, and it's often same-day for weekday slots in the city core. Text a photo of the roof or balcony and we'll give you the next real slot, not a call-centre estimate.
What does it cost with travel?
$449 flat for a standard roof or gable mount, or $549 for a pole or non-penetrating mount — and travel is free anywhere in Zone A, which covers all of Toronto and the inner GTA out to Oakville and Milton. The number you get on the phone is the number confirmed in writing before we book, and it doesn't change at your door.
Can you bring the Starlink kit, or do I need to order it myself?
Either way works. If you don't have a kit yet, we can source a genuine one — hardware and mounts from authorized Canadian retail — and bring it on install day, billed at cost with the receipt in your hand, plus $100 for the sourcing and delivery run and $50 for account setup if you want that handled too. Order it yourself and neither fee applies. Already have a kit sitting in a box? Even easier — just text us a time.
Book it

Fastest way: text a photo of the roof or balcony and your postal code

CALL / TEXT — EVERY DAY, 9 AM TO 9 PM +1 (705) 717-7074
EMAIL book@wirewolf.io
BASE Etobicoke, Toronto — Zone A means free travel across the GTA core
ALSO SERVING Starlink installation in Milton